|How to Hack Wi-Fi Password Using CMD|
Wi-Fi is the best and the easiest method to connect with the internet. Here in this article, I am going to tell you how you can hack Wi-Fi password of your friends or neighbors easily using CMD.
CMD stands for Command Prompt and Command Prompt is the reliable way to check security issues with any device related to computer. CMD was also being used an Operating System before the development of Microsoft Windows that system was called DOS.
CMD (Command Prompt) cannot hack all kind of networks but it is still able to hack WEP Wi-Fi networks easily and the best thing is if your victim network is using an old model of modem and the encryption of his network is WEP then this hack can work 100% and I give you guarantee that you will be connected to a Wi-Fi network in next 5 minutes. Below is some information which you should know before starting this hack.
What are WEP and WPA?
WEP stands for Wired Equivalent Privacy. It is used to set security key on wireless networks like Wi-Fi networks so they cannot be accessed by unauthorized persons, this encryption method was introduced in 1999 and it used 128 and 256-bit encryption to secure the passwords. Hacking into 256-bit encryption is not easy that’s why 128 bit is super easy and users can easily hack Wi-Fi passwords which have old modems because they use 128-bit encryption method.
WPA stands for Wireless Protected Access. It is also used to implement a security key on wireless devices but this encryption is only 256 bit so it is not easy to access passwords using CMD from this method, but there are certain methods which if followed can hack this encryption method, that’s why in 2006 the upgraded version of WPA was introduced and was called as WPA2. WPA2 Also used the same encryption method for securing your wireless networks but it is more secure and easy than any other. If you want to secure your wireless network then you should use this encryption method because it is the best then any other.
Disclaimer: This article is just for the sake of information that how someone can hack your Wi-Fi password easily using CMD (Command Prompt), I don’t mean that you hack someone’s Wi-Fi network using this technique. If you do anything illegal then the admin of this blog will not be held responsible for any action that may be taken on you. So do everything on your own behalf.
How to Hack Wi-Fi Password Using CMD
We have introduced you a lot about hacking Wi-Fi password using CMD below are some simple and easy to implement steps which you can follow to hack Wi-Fi passwords. But remember I do not give you guarantee that this hack will work for you.
First of all, you need to open CMD as this method is based on CMD so you should open it first with administrator’s rights. Go to start, then All Programs, then accessories, then right click on CMD icon and select run as Administrator. You can also use Windows + R keys to open CMD but it may not open in administrator’s mode.
Now turn on the Wi-Fi adapter of your laptop and look is there any signal present, if yes then move towards the command prompt and paste below command.
The purpose of this command is to display the list of all available Wi-Fi networks on your Command Prompt window.
Then type the below command by replacing the wifi name with your desired network which you want to hack.
Wait for a single second and pray for the hacking and that’s it you have successfully hacked the Wi-Fi network using Command Prompt.
So this was a simple and easy method to Hack into someone’s Wi-Fi network and start enjoying the hacking I mean the internet easily. If you like this article then do share and tell your friends about I Tech GYD.
Thank you very much for your precious time on I Tech GYD.
More from my site
Hi. This is Faizan Gul. I am an Engineering Student and tech enthusiast. I love to practice new things and then write about them. In this blog, i would be writing about how to tech guides, tricks and tips and Tech Gadgets Reviews.